• ToolShed 180A Inverter MIG Welder

ToolShed 180A Inverter MIG Welder

$999.00 Inc GST
or 6 weekly, interest-free payments of $166.50 Inc GST Laybuy What's this?


ToolShed Trade Inverter Portable MIG/TIG/ARC Welder

The ToolShed Trade MIG 180 welder is a great multipurpose welding machine suitable for on site welders, repair workshops, automotive workshops, farm workshops etc... It offers the user a 180 amp DC gas/gasless MIG welder

Plus a 150 amp DC Arc welder (lead included)
Plus a 180 amp DC TIG welder (lead included)
all in one!

This MIG welder is top of the line! Fitted with a high quality wire feed system, this machine is very smooth and doesn't encounter the problems often found with cheaper wire feed units. It is also fitted with fine voltage/current controls which are extremely smooth to weld with and is a pleasure to use. The output current goes as low as 30 amps which makes it ideal for small panel-steel work.
Its polarity can also be reversed easily so that gas and gasless wire can be used and can take up to 5kg spools of MIG wire.

With the flick of a switch and attaching the arc lead this machine can be set up as a full DC arc welder offering a current range from 30-150 Amps which is suitable for running electrodes from 2 – 3.2mm. This machine also comes with the ability to connect a TIG torch and you can TIG weld from 20-180 amps in DC suitable for mild steel and stainless steel etc.

It comes with heavy duty earth leads with dinse (quick change bayonet style) connectors, as well as a 3m 150amp Binzel style Eurofit MIG torch complete with consumables to get you started. Superior design lets you control all the modes of this machine within seconds.

The rated duty cycle is 25% at 180 Amps plus it is fan cooled with over temperature cut out to protect it .

All this is housed in a light weight,package with a carry handle weighing just 17Kg

All ToolShed Trade Inverter welding machines are manufactured with latest inverter technology they are far more efficient, reliable, faster and have higher current handling capabilities than transformer and other inverter systems.

The ToolShed is very proud of the performance and reliability of our welding machines. We are so confident that we offer a full 24 month manufactures trade warranty on all welders and have full back up and service available to offer you piece of mind.

DON'T BE FOOLED BY THE PRICE ! The ToolShed source this machine directly out of the factory. We virtually pull it out of the container and put it on the shelf! No middle man, no brand royalty, no agents fees you get a quality machine with-out the cost.

Please find a simple guide for what this machine can be expected to weld in mild steel in MIG mode .
Welding current range Wire size Material Thickness
30 to 60A 0.6mm 1 to 3mm
60 to 120A 0.8mm 3 to 5mm
120 to 200A 0.9mm 5 to 12mm

Below is a simple guide for what this machine can be expected to weld in mild steel in the arc welding mode
Welding current range Electrode Diameter Material Thickness
40 to 70A 2.0mm up to 3mm
55 to 90A 2.5mm up to 5mm
90 to 150A 3.2mm up to 10mm

Please note that this machine has been fitted with a 15 Amp plug to comply with NZ electrical regulations due to its high power consumption.
This machine will not plug into a standard 3 pin 10 Amp power outlet and modifications may need to be made before operation.
Contact an electrician or one of our stores for more information.

Voltage 240v
Frequency 50/60Hz
Current Range
20- 180Amp MIG Duty Cycle 25%
20-150Amp Arc
20-180Amp TIG
Lead lengths 3m

Electrode diameter
2 – 3.2mm Arc Rods
0.6-0.9mm MIG wire

Weight: net 17Kg

Begin typing your address and select the address from the list below