ToolShed Rotary Hammer Drill 32mm 850w

$299.00 Inc GST
or 6 weekly, interest-free payments of $49.83 Inc GST Laybuy What's this?


ToolShed 32mm 850w Rotary Hammer Drill

This awesome pistol grip rotary hammer drill features three different modes.
This includes a straight drilling mode, a rotary hammer mode (which allows it to drill masonry) and a straight Hammer mode for chiseling masonry.

This unit can drill up to 68mm in masonry with a core drill and 32mm with an SDS Plus masonry bit, 13mm in steel and 30mm in wood. It uses SDS Plus bits for masonry drilling and chiseling and comes with a 13mm keyed chuck with an adaptor to enable you to use round shafted drill bits.

This machine comes with a full length soft hand grip on the rear handle and a removable side handle for extra control and comfort especially when you are drilling those larger holes or chiseling.

Variable speed control, which ranges from 0 to 1300 rpm enables you to select just the right speed for the job you are doing. It can also be adjusted from 0 to 5100 blows per minute when chiseling. This rotary hammer drill also features a reverse function for backing out those stuck drill bits!

It comes with a 6, 8 and 10mm SDS Plus Masonry bit along with a point and a 20mm chisel , An easy to use steel depth gauge is also included to drill just the right depth of hole you need. All contained in a robust carry case.

When installing your SDS Bits , clean the bit shank and apply a smear of grease to it. This will ensure a smooth action and extend the bit life.

Net weight - 3.05kg
Power - 850w
RPM - 0 -1,300/min
Beats per minute - 0 - 5,100BPM
Max capacities
Masonry - 68mm (core bit), 32mm (solid bit)
Steel - 13mm
Wood - 30mm
Carry case Size 430mm x 290mm x 105mm

Begin typing your address and select the address from the list below