• ToolShed TIG Torch

ToolShed TIG Torch

$99.90 Inc GST


ToolShed Welding TIG Torch

Do you have an inverter Arc welder and would like to do some basic TIG welding with this torch you can.

Simply plug the torch into the outlet on the front of the machine and connect the gas hose directly to the gas bottle.

Turn the gas on and strike the arc using the "lift arc" method.

Torch measures 3m in length with an extra 1m of gas hose.

Fits the standard small dinse plugs on most smaller inverter welders and has a WP-17 standard TIG torch head rated to 150 Amps

Comes with the following consumables to get you started:

- No4, No5 and a No6 ceramic
- 3.2mm collet body
- 1.0, 1.6, 2.0 mm collets
- Long and stubby back cap
- Gas hose clamp

Please note this torch does not have a trigger setup so is only designed to be used as a "lift arc" tig, suitable to be used with the ToolShed inverter arc welders and many other brands please check the manufactures recommendations.

Begin typing your address and select the address from the list below