• ToolShed Plunge Cut Rail Circular Saw

ToolShed Plunge Cut Rail Circular Saw

$399.00 Inc GST
or 6 weekly, interest-free payments of $66.50 Inc GST Laybuy What's this?


ToolShed Plunge Cut Rail Saw
I hate to think of how many hours over the years how many ours I have wasted over the years cutting sheets ! Looking for a straight edge, clamps, measuring the size cut I wanted then checking and allowing for the distance from the outside of the circular saw base to the blade. Then at times only to find somebody had dropped the circular saw an the blade wasn't running parallel to the base of the saw any way!
Frustrating ! Using the ToolShed rail saw makes your operation so much easier.
The blade on the rail saw runs hard up against the soft plastic piece on the aluminum rail. The aluminum rail also has a rubberized grip under it to prevent it slipping.
Simply line the plastic edge up against the lines on your sheet , adjust your saw so it just goes through the sheet, clip it into the rail and run the saw across the sheet.

This amazing unit is compatible with Makita rails!
The ToolShed is proud to bring you an excellent quality plunge cut rail saw at a bargain price!
Great features like
- Cast alloy base, blade housing and gear box for extra strength.
- A powerful 1200w motor with variable speed from 2000 - 6000/min so you can set the best speed for your material
- Absolutely super accurate cutting when used with a rail
- Rail and connectors are interchangeable with Makita
- 2.5mm depth stop for scribing function
- Provision for dust extraction

Rail not included

Power - 1200w
No load speed - 2000 - 6000/min
Mitre settings - 0 -45deg
Blade size - 165mm
Max cutting depth at 90deg - 54mm
Max cutting depth at 45deg - 38mm on rail, 42mm without rail
Weight - 5kg

Begin typing your address and select the address from the list below